User manual

28 Cubis MSU Brief Instructions
Information for the User
event/printout of component/results of application/end task/calibration-
adjustment protocol event
Configure data output: Options: *Configured print protocol/ FlexPrint
Print button elements: Defines which texts should be printed. Options: GMP
header / GMP footer / empty line / dashed line / date and time / name / weight
block / gross weight / gross2 weight / net weight / increased resolution weight
value / tare weight / tare1 weight / tare2 weight / range 1 / metrol. minimum /
metrol. maximum / metrol. verification scale interval “e” / metrol. scale interval “d”
/ number of areas / manufacturer / model / serial number / balance version / display
version / interface version no. / draft shield version / service contact person /
telephone no.. / email address / technical hotline / Internet address / maintenance
contract / maintenance cycle / IP address / host name / user name / user description
/ task title / task description / leveler result
Setting the Date and Time
The system clock as well as the time setting of the weighing module is displayed.
You can set the current date and time.
Defining Properties of the Display and Control Unit
The following properties of the display and control unit can be changed, as
necessary: Language, help text (on/off), background colors, brightness, acoustic
signal.
Defining Interfaces and Network Settings
Settings for Serial Interfaces. Here you can configure the serial interfaces.
Network Settings (Ethernet)
Here you can configure the network settings: Device name, network IP settings,
IP address, subnet mask and standard gateway.
The device name (max. 24 characters) defined here can be printed on reports.
t To save the settings, select Save.
Remote Network Settings
Enter here the network addresses for the VNC client and the LPR (remote) printer.
t To save the settings, select Save.
Configuring the Alibi Memory
Alibi Memory On/Off. You can switch the Alibi memory on or off.
Auto Delete. You can configure the Alibi memory to be regularly deleted and
define the deletion cycle (in days).
Restoring the Factory Settings (Reset)
You can delete all of your settings and restore the factory settings.