User manual

24 Cubis MSU Brief Instructions
Information for the User
Level the Balance (Q-Level)
For precise weighing results, it is essential that the balance be completely level. Any
slight unevenness of the surface on which the balance rests can be compensated for
by adjusting the front feet of the balance. All Cubis balances are equipped with the
automatic leveling function Q-Level. An integrated sensor detects the alignment of
the balance and generates a warning if leveling is required.
The leveling must be performed as soon as the message Level me appears in the
display. This can be done very quickly thanks to the simple user guidance.
t Make certain that the weighing pan is empty.
t Follow the instructions on the display.
Calibration/Adjustment Data
The configuration options are divided into four areas.
t Select the area in which you would like to configure settings.
t Follow the instructions on the display.
y As soon as all options have been configured, the overview of all settings is
displayed.
t To save the settings, select Save.
Defining Calibration and Adjustment Functions
Defining Functions of the CAL button. Options: Lock the button/*Configure the
button selection menu/Select fixed 1-button function.
Defining the Selection Menu of the Cal.Adj. Button. Which calibration/
adjustment functions should be offered after pressing the Cal./Adj. button.
Selecting the Sequence for Calibration/Adjustment. Options: *Calibration and
then automatic adjustment/calibration and then manual adjustment.
Selecting the Unit for Calibration/Adjustment. Options: *Grams/kilograms.
Defining External Calibration Weights
Defining the Number of External Calibration Weights.
Entering the Data for External Calibration Weights. Weight value / identifier /
certificate