User manual

14 Cubis MSU Brief Instructions
Information for the User
Example: Creating a Task
D t Open the Task Management and select Edit..
y The list of options is displayed.
t To define a new task, select Create.
y The list of applications is displayed.
t To see all applications, page down with the cursor softkeys.
t Select the application you wish to use in the new task.
t Configure the application as desired. The program automatically guides you
through the configuration procedure.
t Configure additional applications for the task, if desired.
y After configuring all applications for the new task, two more prompts follow:
Weighing parameters and printout parameters. All settings configured here
affect only the new task.
If the balance is verified for use in legal metrology, some of the options for
modifying parameters may be hidden or limited.
Weighing Parameters Prompt
t Check the settings and modify them as needed.
Explanations of the individual options can be found in the System Settings chapter
in the section Device Parameters.
t Select Next.
Printout Parameters Prompt.
t Check the settings and modify them as needed.
Explanations of the individual options can be found in the System Settings chapter
in the section Device Parameters.
t Select Next.