User manual

10 Cubis MSU Brief Instructions
Information for the User
Entering Letters and Numbers
When alphanumerical input is required, a keypad is shown on the touch screen.
A cursor is shown in the input line above the keypad.
t Select the character you would like to insert using the cursor softkeys.
t To accept the character, confirm with the softkey Add.
y The characters are shown in the input line as they are entered.
Press Back to cancel the input and go back one step to the last screen.
Press the Shift softkey to change the input mode between uppercase letters,
lowercase letters, numbers and the complete character set with special characters.
Press Add to confirm the selected character and transfer it to the text line.
Press OK to end the input and save your entry.
Press backspace to delete the character to the left of the cursor.
The two arrows move the cursor one character to the left or right.
Activating or Changing Users
In the operating mode, the active user is displayed in the user info area in the
upper right-hand corner of the display. To activate a different user, open the User
Management menu.
H t Press the key USER H.
y The available users are listed. The currently active user is indicated by an arrow
and the highlighting.
t Use the cursor softkeys to select the user you would like to activate, then
confirm with the softkey w.
y The program returns to the operating mode, the selected user is logged in with
the corresponding rights.
t Selecting Start will activate the currently selected user.