Operating instructions

94
Preparation
● Turn on the scale: press e
> The Sartorius logo is displayed; a self-test is performed
● Select the “Formulation” application in the Setup menu: press M
● Select
Application parameters: press the q soft key 2 x,
then the O soft key once
● Select Application 3 (data records): press the q soft key
2 x, then the O soft key once
● Select Formulation: press the Q or q soft key
● Confirm Formulation: press the O soft key
Formulation Automatic ο Off
storage On, first value at stability
Minimum load for None
automatic storage ο 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Source of data ο Application 1
for automatic storage Application 2
Evaluated values ο Net
Calculated
Net + calculated
Evaluation mode, ο Intermediate evaluation, print
MR function Final evaluation, print
Printout od individual No
components ο Yes
ο = factory setting
see also the “Application Parameters (Overview)” in the chapter entitled
“Configuring the Scale”
● Save settings and exit the Setup menu: press the oo soft key
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
● Press the isoTST soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to Another Application
● Press D
> See the section on the
corresponding application
program for further instructions
Setup (Setting Parameters)
● Press M
> See “Configuring the Scale” for
further instructions
Turning Off the Scale
● Press e
> The scale shuts off
> The display goes blank, then
OFF or Standby is displayed with
backlighting