Operating instructions

66
Calculation D
Purpose
With this application program you
can calculate a weight value using an
algebraic equation. This can
be used, for example, to determine
the weight per unit area or “gsm”
weight (grams per square meter)
of paper.
You can use this application in
combination with any program
chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application 3
(totalizing, formulation, statistics).
Features
– You can store an equation and
configure the Setup menu to
initialize this program automatically
with the stored equation (Setup:
Application parameters: Auto-start
app. when power goes on: On)
– The “
o” symbol is displayed to
indicate a calculated value; the
equation used is displayed in
the text line
– If no equation was entered, the
weight value is displayed
– Toggle between the weight
readout, equation input and
display of the calculated result by
pressing the corresponding soft
keys (or press c to toggle bet-
ween weight and calculated value)
– There are four operators
(+, –, *, /) and one factor (weight
value) available when you enter
an equation
– Max. equation length:
28 characters
– Pressing c will delete either
the equation or the last character
entered, depending on the
configuration in the Setup menu
(Setup: Device parameters: Keys:
CF function for inputs: Delete last
character; see also »Configuring
the Scale«)
– The calculated result is displayed
with the number of decimal places
configured in the Setup menu.
Not all decimal places are
displayed if the result is longer than
the display allows. If there are
more digits before the decimal
point than the display can show,
an error message is displayed
– The equation is stored in
non-volatile memory
Factory Settings
Decimal places in calculated result:
2 decimal places
Soft Key Functions
Equat. Toggle to equation
+ Enter an addition operator
in the equation
- Enter a subtraction
operator in the equation
* Enter a multiplication
operator in the equation
/ Enter a division operator
in the equation
Start Start calculation
Weigh Toggle to the weighing
mode
Weight Enter a weight operand
in the equation
Printout for Calculation
The calculation result is printed.
Res + 693.88 o
Res: Result of calculation with
equation