Operating instructions

59
Operating the Scale
Practical Example
Determining Animal Weight with Automatic Start of 20 Subweighing Operations for Averaging; Automatic Printout
of the Number of Subweighing Operations and of the Animal Weight
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Animal weighing: Animal activity: Active
Setup: Application parameters: Application 1: Animal weighing: Decimal places in calculated result display: 2 decimal places
Setup: Application parameters: Application 1: Animal weighing: Printout: Average and calculated values
Setup: Printout: Application-defined output: Auto print upon initialization: All values
Step Press key(s) Display/Output
(or follow instructions)
1. Delete previous values, if necessary c
2. Prepare a container (cage) Place empty cage
on the scale
3. Tare the scale t
4. Enter number of subweighing 2 0
operations for averaging
5. Save number
mDef soft key
6. Weigh the first animal Place 1st animal in cage Weight value fluctuates due to animal activity
7. Start automatic animal weighing
Start soft key
The scale delays starting the When this criterion is met, the
subweighing operation until subweighing series begins
three successive subweights lie
within the range defined for
an “active” animal