Operating instructions

58
Preparation
● Turn on the scale: press e
> The Sartorius logo is displayed
● Select the “Animal weighing“ application in the Setup menu: press M
● Select
Application parameters: press the q soft key 2 x,
then the O soft key once
● Select
Application 1 (basic settings): press the O soft key
●
Select Animal weigh.: press the Q or q soft key (repeatedly, if necessary
● Confirm Animal weigh.: press the O soft key
Animal weigh. Animal activity Calm
Normal
Active
0.1% of the animal/object
0.2% of the animal/object
0.5% of the animal/object
1% of the animal/object
2% of the animal/object
o 5% of the animal/object
10% of the animal/object
20% of the animal/object
50% of the animal/object
100% of the animal/object
Start Manual
o Automatic
Minimum load for None
autom. storage 10 digits
20 digits
50 digits
o 100 digits
200 digits
500 digits
1000 digits
Decimal places None
in calculated result 1 decimal place
o 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
7 decimal places
Printout None
o Average weight only
Average and calculated value
o = factory setting
see also the “Application Parameters (Overview)” in the chapter entitled
“Configuring the Scale”
● Save settings and exit the Setup menu: press the oo soft key
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
● Press the
isoTST soft key
> See “Calibration/Adjustment” for
further instructions
Toggling to the Next Application
● Press D
> See the section on the
corresponding application
program for further instructions
Setup (Setting Parameters)
● Press M
> See “Configuring the Scale” for
further instructions
Turning Off the Scale
● Press e
> The scale shuts off
> The display goes blank, then
OFF or Standby is displayed with
backlighting