Operating instructions

Operating the Scale

Practical Example P1: Weighing in Percent with Reference Weight Taken from Weight on Scale

Settings (changes in the factory settings required for this example):

Setup: Application parameters: Application 1: Weighing in percent

Setup: Printout: Application-defined output: Auto print upon initialization: All values

Step Press key(s) Display/Output

(or follow instructions)

1. Delete previous values, if necessary c

2. Prepare a container Place the empty container

for the parts on the scale

3. Tare the scale t

4. Place the reference weight Place weight equal

on the scale (here: to reference weight in

(1821.48 g equals 100%) the container

5. Initialize the scale

Start soft key

6. Unload the scale Remove reference

sample from the container

7. Determine the percentage Place sample to be

of an unknown weight measured in the container

8. If desired, print percentage p

(in this case: 98.37%)

pRef + 100 %

Wxx% + 1821.48 g

Prc + 98.37 %