Operating instructions

Tare Memory, Calculated Values:
The symbols displayed here indicate
when there is a value in one of the
tare memories or when the value
shown is a result of calculation rather
than direct measurement.
These symbols are as follows:
a Calculated value
s1 Net value/tare memory
s2 used by an application pro-
gram (e.g., formulation,
second tare memory)
Application Pictograms:
The pictograms displayed here
indicate the application(s) selected.
The pictogram is displayed inversely
(white on a black background) when
the corresponding application is
active.
For example, the following symbols
may be displayed simultaneously:
A The counting application is active
H Checkweighing is also active
S Print
T Data record
Text Line:
Additional information is displayed
here (e.g., operator guidance
prompts, name of the active program,
etc.)
Soft Key Labels:
The current functions of the soft keys
above the function keys (arrow keys)
are indicated here; during
calibration/adjustment, this line
shows up- and down-arrows (Q and
q) for selecting calibration and
adjustment functions.
Display for Menu Parameter Settings
(Setup)
This display is divided into
three sections.
Status Line:
The status line of shows the function of
the display screen page. In the Setup
menu, the current menu “path” is shown
here.
Setup Menu Example: “Scale functions”
Input and Output Window
This window contains either detailed
information (e.g., on the active
application) or a pick list. A selected
item is displayed inversely (white
characters on a black background).
You can also enter information in an
active field in this window using the
alphabetic and numeric keys.
Setup Menu Example, “Device
parameters, Adapt filter”:
The following symbol in the input and
output window may be displayed:
S this symbol marks the saved menu
setting
Soft Key Labels
See the description “Function Keys
(Soft Keys)” on the previous page
Minimum vibration
o Normal vibration
Strong vibration
Extreme vibration
SETUP BAL.FUNC.
Line for Operating State
Input and Output Window
Soft key labels
To set a parameter:
§
Press the Q or q soft key repeatedly
until the desired setting is selected
(displayed inversely)
§ Confirm your selection: press the l
soft key
To change the numeric value of a
parameter:
§
Press the Q or q soft key repeatedly,
if necessary, until the desired
setting is selected (displayed
inversely)
§ Enter a new value or character:
use the 0 1 … 9 . or the
a key and enter the desired
letters
§ Confirm your selection: press the l
key
To exit Setup: press M or the oo
soft key
5
Operating Design