Operating instructions

Operating the Scale

Additional Functions

In addition to the functions for:

– alphanumeric input,

– taring (not during

alphanumeric input),

– printing (NUM print; S ID),

you can also access the following fun-

ctions from this application:

Calibration/Adjustment

● Press the

isoTST soft key

> See “Calibration, Adjustment”

for further instructions

Toggling to the Next Application

● Press D

> See the section on the

corresponding application

program for further instructions

Setup (Setting Parameters)

● Press M

> See “Configuring the Scale” for

further instructions

Turning Off the Scale

● Press e

> The scale shuts off

> The display goes blank, then

standby or off is displayed with

backlighting

Practical Example

Toggle the Display from Grams [g] (1st Unit) to Pounds [lb] (2nd Unit)

Settings (changes in the factory settings required for this example):

Setup: Application parameters: Application 1: Toggle wt. units: Weight unit 2: Pounds/lb

Step Press key(s) Display/Output

(or follow instructions)

1. Toggle back to the basic unit c

(

$: Weight unit 1)

2. Change weight unit

lb soft key

to pounds [lb]

(

%: Weight unit 2)

3. Change weight unit g soft key

to grams [g]