Manualshelf

Operating instructions

ManualsBrandsSartorius ManualsKitchen AppliancesFactory Series
31323334353637383940
36
Assigning IDs to Weights (if desired):
● Select the parameters “Line
format”
and “For other apps /GLP” in the
Setup menu: press M
● Select “Printout”:
press the q soft key three times,
then the O soft key once
● Select “Line format”:
press the q soft key three times,
then the O soft key once
● Set parameters: see the chapter
entitled “Configuring the Scale”
● Exit the Setup menu: press M
Additional Functions
In addition to the functions for:
– alphanumeric input
– taring (not during alphanumeric
input)
– printing
you can also access the following
functions from the weighing
application:
Calibration
● Press the
isoTST soft key
> See the section on “Calibration/
Adjustment” for further instructions
Setup
● Press M
> See the chapter entitled
“Configuring the Scale” for further
instructions
Turning Off the Scale
● Press e
> The scale shuts off
> The display goes blank, then
standby or off is displayed with
backlighting.
Practical Examples
Example W1: Simple weighing
Step Press key(s) Display/Output
(or follow instructions)
1. If necessary, tare the scale t
(
S symbol: scale is tared
– verified scales only)
2. Enter sample ID see example W2
3. Determine sample weight Place sample on scale
(example)
4. Print weight p