Operating instructions

MP8 Interface Emulation
Purpose
With the MP8 interface emulation
function, you can connect peripheral
devices of the MP8 generation that
have separate AC power supplies
(such as the 73822... Data Control
terminal, a YFC..., or a YDI 50 Z
Data Input dedicated keyboard, for
example) to your FCT terminal.
Features
– The scale can be used only to
determine weights.
– The interface communicates
exclusively in the MP8 binary
protocol.
– Select the application program
and the program index for MP8,
as well as individual application
parameters, in the Setup menu.
Preparation
– Activate the MP8 emulation
mode*:
§ Press M
§
Select the factory settings
and confirm: press the q soft key
repeatedly and then the O soft key
§ Select
Reset to MP8:
press q soft key and O soft key
§ Select
Yes and press l to confirm
> The terminal is restarted
* follow the same procedure to return
from MP8 emulation back to
factory setting
Factory Settings
Each parameter category has a
factory setting. To restore the factory
settings, select this item in the Setup
menu and select YES to confirm.
The following parameters are not
restored to factory settings when you
activate this function:
– Language
– Password
– Display contrast
– Time (clock)
33
Configuring the Scale