Operating instructions

Generate “FlexPrint”
Purpose
You can use a PC with the YAD02IS
"Nice Label Express" software from
Sartorius to load user-defined label-
printing formats in your FCT01 scale.
This software lets you connect any of
a number of printers, equipped with a
variety of printer fonts, to the RS-232
interface on your FCT01 terminal.
Features
With the “FlexPrint” option activated:
–
Print command generates configured
printout (if print instruction file exists;
see table, next page).
Print command generates default
printout (if print instruction file does
not exist).
– The function that generates an
automatic printout upon initialization
of an application cannot be used.
Initialization data can be output
only to a print instruction file.
The following items are output only as
standard printouts:
– Calibration/adjustment reports
– SETUP printouts
– p key in “Identifier” mode:
display page
– p key in “Product data memory”
mode: display page
Parameter Display text Indiv. Comp. Total
With the “Differential
weighing”application:
Lot name
Lot name xx
Sample number Sample no. x
Date/time of
sampling Sample date x
Sample
identification Sample ID x
Tare weight or input Tara (T/PT) x
Initial weight
or input Net initial wt. x
Backweight
or input;
residue as weight Backweighed res. x
Residual weight
in percent Residue in % x
Weight loss Weight loss x
Loss in percent Loss in % x
Factor used in
calculation Factor x
Parameter Display text Indiv. Comp. Total
Loss calculated
D.res. x
as a weight
Ratio1 % (DR) Ratio1 x
Ratio2 % (OR) Ratio2 x
Date/time of
statistics Date of statis. x
Statistics
identification Statistics ID x
Number of
samples No. of samples x
Mean value Mean value x
Standard
deviation Standard dev. x
Variation
coefficient Variat. coeff. x
Sum Sum x
Minimum Minimum x
Maximum Maximum x
Difference between
minimum &
maximum Difference x
30
– p key in “Parameter” display
page mode for “Checkweighing”
application: print function carried
out
– MR function carried out when p
key pressed during evaluation (info
window) in Totalizing and Statistics
applications.
– Printout for legal metrology:
Weight blocks (special weight
value formats that are acceptable
in legal metrology) are designated
by the following line, which is
printed in both header and footer
and cannot be edited:
------ CE [M] -------
Examples of Weight Block Printouts
Without tare:
------ CE [M] -------
N + 348.65 kg
------ CE [M] -------
With tare:
------ CE [M] -------
G + 459.70 kg
N + 348.65 kg
T1 + 111.05 kg
------ CE [M] -------
Scale tare (2nd tare memory):
------ CE [M] -------
G + 124.45 kg
N + 100.00 kg
T1 + 24.00 kg
T2 + 0.45 kg
------ CE [M] -------
Preparation
– Configure FlexPrint in Setup:
press the M key
– Select Printout:
press q soft key 3 times and then
O soft key
– Confirm
Application-
defined output
:
press O soft key
– Select FlexPrint:
press
q soft key 4 times and then
O soft key
– Select On:
press q soft key and then
O soft key
– Save settings and exit Setup:
press
oo soft key