Operating instructions

Setup – Application 1 Calculation Decimal places in None
Application (Basic settings) calculated result 1 decimal place
parameters ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Differential weighing Weighing sequence* Individual weighing
Consecutive individual weighing
ο Combined weighing
Serial weighing
Tare weighing No
ο Yes
Result with None
decimal point 1 decimal place
ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Autosave ο Off
values On, first value at stability
On, last value at stability
On, value bet.
70 – 130% at stabil.
Minimum load None
for autosave ο 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Save statistics ο No
Yes
Generate printout None
ο Automatic after backweighing
Auto. after initial weigh.
and backweighing
Automatic after tare-, initial-
and backweigh.
Include sample ID ο No
in text line Yes
Wg.seq key No
ο Yes
Clear sample after ο No
individual weight, result + Yes
and unload
Last residual weight is stored ο No
as initial weight (ashing) Yes
Applications 2 and 3 see following pages
* = Setting can only be changed when the program is initially run and when the Wg.seq. key option is set to “No”
20
Factory setting