Operating instructions

Error Code/Message Displayed Cause Solution
CF not possible Only one sample or certain portions Samples can be deleted one
of a sample can be deleted by at a time on the display page
pressing the c key. This message for samples
indicates that further delete functions
are not possible.
Calculated statistics Message output when statistics Goes out automatically
are being calculated. This process
can take several seconds if there are
many samples.
No statistics available No valid backweights available Goes out automatically
in this lot
No net initial wts. In serial and combined weighing, Measure initial weights
available no initial weights found
If any other errors occur, contact your local Sartorius Service Center!
154