Operating instructions

127
Operating the Scale
Example: output weight of + 1255.7 g
Position 1 2345678910111213141516
+***1255 . 7*g**CRLF
Position 1: Plus + or minus sign – or space
Position 2: Space
Positions 3–10: Weight with decimal point; leading zeros are output
as spaces
Position 11: Space
Positions 12–14: Characters for unit of measure or space
Position 15: Carriage return
Position 16: Line feed
Data Output Format with 22 Characters
When data with an ID code is output, the ID code consisting of 6 characters
precedes the data with the 16-character format. These 6 characters identify the
subsequent value.
1234567891011121314151617181920 21 22
IIIIII+*DDDDDDDD*UUUCRLF
*****– ........ ***
* ********
000000
I: ID code character
1)
E: Unit symbol
1)
see “Toggle
*: Space between Weight Units”
D: Digit or letter CR: Carriage return
LF: Line feed
1)
depends on scale type; e.g., not all units and characters are
available on scales verified for use in legal metrology
Special Codes
1234567891011121314151617181920 21 22
S t a t ********––******CR LF
HH
LL
C
*: Space L: Underload
– –: Final readout mode L L: Underload in checkweighing
H: Overload C: Cal./adjustment
H H: Overload in checkweighing
Error Codes
1234567891011121314151617181920 21 22
S t a t * * * * * E r r * # # # * * * * CR LF
*: Space # # #: Error code number
ID code characters I
1)
Stat Status
ID Identification (Identifier)
LID Weighing series no. (lot)
WID Weight set number
Nom Exact calibration weight
(value)
SID Sample ID
NUM Numeric ID
T1 Application tare
memory 1
N Net weight (T1 = 0)
N1 Net weight (T1≠ 0)
Qnt Piece count
Prc Percent
nRef Reference sample quantity
pRef Reference percentage
wRef Reference piece weight
Wxx% Reference percentage
weight
mDef Target value for animal
weighing
Mul Calculated result in
animal weighing
x-Net Result in animal weighing
x-Res Calculated result in
animal weighing
Res Result using equation
(calculation)
Setp Targt value for
checkweighing
Min Lower limit for
checkweighing
Max Upper limit for
checkweighing
Time Time that a value was
stored
Compxx Component no. xx
in formulation
Tot.cp Total weight in formulation
n Transaction counter
Total Sum of all values
Avg. Average in statistics
s Standard deviation
srel Variation coefficient
Diff Difference between
maximum and minimum