Operating instructions

126
Data Output Format (Line Format)
You can output the values displayed
in the line for measured values and
the weight unit with or without a data
ID code
Example: Without data ID code
+ 253 pcs
Example: With data ID code
Qnt + 253 pcs
Configure this parameter in the
Setup menu (Setup: Printout:
Line format).
The output with a data ID code has
16 characters; without a data
ID code, 22 characters.
Output Format With 16 Characters
Display segments that are not activated are output as spaces. Characters
without a decimal point are output without a decimal point.
The following characters can be output, depending on the characters displayed
on the scale:
Normal Operation
Position 1 2345678910111213141516
+*DDDDDDDD*UUUCRLF
or – ........ ***
or * ********
or 000000
*: Space
D: Digit or letter
U: Unit symbol
CR: Carriage return
LF: Line feed
Special Codes
Position 1 2345678910111213141516
******––******CRLF
or H H
or L L
or C
*: Space
– –: Final readout mode
H: Overload
H H: Overload in checkweighing
L: Underload
L L: Underload in checkweighing
C: Cal/adjustment
Error Codes
Position 1 2345678910111213141516
***E r r **/###****CRLF
*: Space
# # #: Error Code number