Operating instructions

122
Configuring Printout Formats
For a number of application programs,
you need to set initialization values.
All values upon initialization or only
the main values can be automatically
printed as soon as you have
configured this in the Setup menu:
Auto print upon
initialization
Weights and calculated values can
be printed as numeric values either
with a preceding data ID code
(numeric value with 22 characters)
or without one (numeric value only
16 characters). See also the section
on Line format under the
“Data Output”.
You can define whether an ISO/
GLP/GMP-compliant format is used
for every printout, only for calibration/
adjustment records, or not at all. See
also page 125.
Printout ISO/GLP/GMP-compliant
Records
In the Setup menu, you have a choice
of three settings:
– No ISO/GLP record printed (Off)
– ISO/GLP/GMP record printed
only for calibration/adjustment
(Only for calibration/
adjustment)
– Every printout is an ISO/GLP/
GMP-compliant report (Always
on)
Auto print checkweighing results:
automatic printout of a weight when it
is within the preset limits at stability
Auto print with time-controlled functions:
automatic printout of weights after a
preset time has elapsed or at a
defined time
Printout of intermediate or final
evaluation from the application
3 memory (totalizing, formulation and
statistics); generate by pressing the
MR soft key
Generating Printouts Acceptable for
Legal Metrology:
You can configure the Setup menu
of the scale to generate data records
that are acceptable for legal
metrology on a Sartorius printer:
– YDP02:
– YDP03:
– YDP01IS:
– YDP01IS-Label:
– YDP02IS:
– YDP02IS-Label: