Operating instructions

121
Operating the Scale
Configuring a Printout
● Turn on the scale: press M
● Select Printout: press the q soft key 3 times, then the O soft key once
Printout Application-defined Stability Without stability
output parameter ο After stability
Print on request, ο Off
then tare On
Auto print upon ο Off
initialization All values
Only main values
Printout
Configuration
– see
“Printout
Configuration”
FlexPrint ο Off
On
Automatic output Stability ο Without stability
of displayed value parameter With stability
Automatic after weight charge*
Start/Stop Use print key
ο Not possible
Time interval ο 1 display update
2 display updates
10 display updates
100 display updates
Output to Serial ο Application-defined output
interface ports communication
Autom. output of displayed value
(PHERIPHERALS)
Line format For raw data (16 characters)
ο For other apps./GLP (22 characters)
ISO/GLP/GMP ο Off
printout Only for calibration/adjustment
Always on
Identification # Lot ID (L ID):
ID1:
ID2:
ID3:
ID4:
Factory settings: No
only printout Yes
ο = factory setting
* = auto print when load change is > 10 d and stability is reached; no printout until residual difference in
load value is < 5 d