Operating instructions

111
Operating the Scale
Practical Example
Create a new product base data record for initializing the checkweighing program, including: target value, minimum,
maximum
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Extra function (F4): Product data memory
Setup: Application parameters: Application 2: Checkweighing
Step Press key(s) Display/Output
(or follow instructions)
1. If necessary, turn on the scale; e
then enter the settings given above
2. In the Checkweighing application,
Param. soft key
toggle to the input mode for target,
minimum and maximum values
3. Enter target: 170 g; see the Example
minimum: 165 g; for Checkweighing,
maximum: 180 g steps 5 through 9
4. Toggle to display of product data
ProDat soft key
(existing data records are displayed;
in this example, 3 data records have
been stored)
5. Enter a name for the new data a
record (here: CHW01) ABCDEF soft key, C soft key
GHIJKL soft key, H soft key
STUVWX soft key, W soft key
0 1
6. Store current Checkweigh
New soft key
parameters as a data record
7. Confirm store function
Store soft key
8. Exit product data display oo soft key
isoTST
CHW01