Operating instructions

109
Operating the Scale
Product Data Memory
Purpose
With this function, you can enter,
store and load data records for
initialization of applications, including
user-defined data.
You can use this function in
combination with a program from
Application 1 (such as counting,
weighing in percent), one from
Application 2 (checkweighing, time-
controlled functions) and an extra
function from Application 3
(identification codes, 2nd tare
memory).
Features
– Store up to 300 data records
– Data records can be created,
stored or deleted individually
– Press the ProDat soft key to
display data records
– Define a name for each data
record of up to 15 alphanumeric
characters; the desired location is
displayed in the product data
memory
– Optional configuration in the Setup
menu to delete a single character
when entering a data record name
by pressing c. Device settings:
Keys: CF function for input: Delete
last character.
– Data records are displayed in
alphabetical order.
– Initialization data set for an
application (such as wRef, nRef) is
saved when you select the Store
option; this data is loaded from the
product data memory when you
access this memory from the
corresponding application
– Use the numeric keypad to search
for and display individual data
records
– You can assign this function to the
fourth or fifth soft key (from the
right), i.e. F4 or F5
– Error messages are displayed in
the text line in plain English – or
your choice of a different
language.
– Press the
Delete soft key to
delete a data record
Data Battery-Backed Data Memory:
When the scale is disconnected from
AC power, this scale-generated data
will remain stored for approx. three
months. In the standby mode, data
are retained by the power supply.
Factory Settings
No user-definable parameters.
Soft Key Functions
ProDat Toggle to data record
display
Delete Delete selected data
record
Load Overwrite the initialization
data with the selected
data record
Change Change the data in the
stored data record
New Create a new data record
(after entering a data
record name).
Store Store the initialization
data of the current
application under the
selected data record
name. If data already
exist for this data record,
a prompt asks whether
this data should be
overwritten.
No Answer “No” to cancel
the initiated delete or
overwrite operation
Yes Answer “Yes” to perform
the delete or overwrite
operation