Operating instructions

105
Operating the Scale
Preparation
● Turn on the scale: press e
> The Sartorius logo is displayed
● Select Extra function (F4) or Extra function (F5) in the Setup menu: press M
● Select Application parameters: press the q soft key 2 x, then
the O soft key once
● Select Extra function(F4) or Extra function(F5):
ress the q soft key 3 x (or 4 x), then the O soft key once
● Select Identification codes
● Confirm Identification codes
Identification Printout Automatic, if configured
Once after pressing print, if configured
ο Each time the print key is pressed
Once for M+ function (app. 3 memory)
ο = factory setting
see also the “Application Parameters (Overview)” in the chapter entitled
“Configuring the Scale”
● Save settings for the printout: press the o soft key 4 x
● Enter ID name: Select “Printout”: press the q soft key, then the O soft key
● Select “Identification #”: press the q soft key 5 x, then the O soft key once
● Select
ID1
● Enter name for ID1 and confirm: use the numeric keys for numbers
and/or the soft keys to enter letters
$ Enter names for ID2, ID3 and ID4, if desired
● Save settings and exit the Setup menu: press the oo soft key
Example
See next page