Operating instructions

Counting

Purpose

With the Counting program you can determine the number of parts or items by weighing.

Example: Determine the number of uncounted parts; weigh in the selectable reference

sample quantity (in this example: 20)

Step Key (or instruction) Display

1. Select application program w > 2 sec

2. Select Counting v repeatedly

3. Confirm setting

Symbol “ ” on the display:

application is active

4. Place empty container on the

balance/scale

5. Zero the balance/scale w

6. Place reference sample quantity (20)

on the balance/scale

7. Select reference sample quantity:

in increments of 1 (1, 2, 3, ..., 99) or v repeatedly (briefly) or

in increments of 10 (10, 20, 30, ...,100) v > 2 sec.

8. Confirm selected reference sample

quantity

9. Place uncounted parts on balance/scale

10. Toggle display between mean

piece weight, total weight, and quantity v repeatedly

11. Unload the balance/scale

12. Counting application:

clear the reference value > 2 sec

13. Reactivate Counting (if no other v

application program has been selected)

14. Repeat procedure starting from Step 5

Enter