Operating instructions

! Use only original Sartorius AC adapters:

– for Asia: 400081.1

– for the U.S.: 400314.1

Connecting the Balance/Scale to AC Power

§ Insert plug into the jack (located on back of the

balance/scale)

§ Plug the AC adapter into an electrical outlet

! LISTED power supply 11 V–21 V compliant with

NEC Class 2 output.

Below-Balance/Scale Weighing

A port for a below-balance/scale weighing hanger

is located on the bottom of the balance/scale.

§ Open the cover plate on the bottom of the

balance/scale.

§ Attach the sample (e.g., using a suspension wire)

to the hanger.

$ Install a shield for protection against drafts if

necessary.