Operating instructions

74 Cubis MSE Operating Instructions
Data Interfaces
Bluetooth® Interface (optional)
How to assemble the Bluetooth® module is described in the supplied installation
instructions.
In order to transmit data via the Bluetooth module, the interface must first be
configured.
Configuring the Bluetooth® Interface
Step Press key Display
t If necessary, toggle to the menu
1. Accessing the Menu: S Press and hold Applic.
1. Display menu level
2. Select and confirm OPT.MOD Repeatedly press Opt.Mod
S, V
3. Select and confirm the DAT.PROT. submenu S, V DAT.PROT.
The following operating modes are possible for this interface under DAT.PROT.:
– SBI (data exchange with PC or notebook)
– Universal printer
– Laboratory printer: parameters for YDP10BT
– No function (off)
t Select the desired operating type.
Establishing a Radio Connection with the Bluetooth® Printer
t Make sure that the printer to which you wish to connect is ready to operate.
t To establish a connection,
Select the OPT.MOD: FIND submenu. S, V Find
y The balance will now search for the Bluetooth device.
This process may take time. wait
Wait for the next message to appear on the display.
! You can only connect to one Bluetooth printer at a time.
y A message will appear to confirm whether the printer has been found. Ser. no.
Connection established to printer YDP01BT: The serial no. appears 23201234
y As soon as the menu is exited, the connection will be re-established.
The LED on the printer will then illuminate permanently (blue).
Bluetooth Series No. and Model ID
t If required, you can enter the serial number and device name S, V SER.No.
(only with Bluetooth modules from Version 04-10-01). S, V Model