Operating instructions

Configuration (Operating Menu)
Cubis MSE Operating Instructions 39
Level 1 Level 2 Level 3 Level 4 Info about Menu Level
2) device extras menu CAN EDIT 2. 1. 1. 1
(Additional Rd. Only Read only 2. 1. 1. 2
functions)
Signal Acoustic Signal off 2. 1. 2. 1
k on 2. 1. 2. 2
Keys (Keypad) k Free 2. 1. 3. 1
Locked 2. 1. 3. 2
ext.key k Print key P 2. 1. 4. 1
External switch function Z/Tara key J 2. 1. 4. 2
cal. key C 2. 1. 4. 3
cf key F 2. 1. 4. 5
enter key V 2. 1. 4. 6
DR.SHIELD 2. 1. 4. 9
Ionizer 2. 1. 4. 10
appl. key 2. 1. 4. 11
Asterisk key * 2. 1. 4. 12
on mode k off/on/sb off/on/standby 2. 1. 6. 1
Power-on mode off/on/so off/on/autom. shut-off 2. 1. 6. 2
on/sb On/Standby 2. 1. 6. 3
Auto On Auto on 2. 1. 6. 4
DR.SHIELD k Off 2. 1. 9. 1
on/ion: Ionizer is turned on
when closing the draft shield 2. 1. 9. 2
Cl/Co: Close AExecute command 2. 1. 9. 3
Locked (blocked) 2. 1. 9. 4
Locked (blocked) 2. 1. 9. 5
Res.dr.sh (Weight k All All decimal places 2. 1.10. 1
resolution when door is open) REDUC.ed 2. 1.10. 2
IONIZER k Off 2. 1.11. 1
Intensity Weak 2. 1.11. 2
Medium 2. 1.11. 3
Strong 2. 1.11. 4
Level Off 2. 1.12. 1
k Note to 2. 1.12. 2
Err.msg. Error message 2. 1.12. 3
LEVELING k key (manual start) 2. 1.13. 1
auto. Auto. before cali./adjustment 2. 1.13. 2
Periphery:/PC USB:
peripher Dat.rec. # SBI (ASCII)
1
) 2. 2. 1. 1 / 2. 3. 1. 1
(25-pin “Peripherals” Operating mode XBPI 2. 2. 1. 2 / 2. 3. 1. 2
interface) Rem.displ. 2. 2. 1. 4 / 2. 3. 1. 4
Uni.print. Universal printer 2. 2. 1. 7 / 2. 3. 1. 7
pc-usb k lab.print (parameters for YDP10 printer) 2. 2. 1. 8 / 2. 3. 1. 8
(USB port “PC”) OFF 2. 2. 1.10 / 2. 3. 1.10
Baudrate 600 2. 2. 2. 3 / 2. 3. 2. 3
1200 2. 2. 2. 4 / 2. 3. 2. 4
2400 2. 2. 2. 5 / 2. 3. 2. 5
4800 2. 2. 2. 6 / 2. 3. 2. 6
k 9600 2. 2. 2. 7 / 2. 3. 2. 7
19200 2. 2. 2. 8 / 2. 3. 2. 8
38400 2. 2. 2. 9 / 2. 3. 2. 9
57600 2. 2. 2.10 / 2. 3. 2.10
115200 2. 2. 2.11 / 2. 3. 2.11
1
) Note concerning verified balances/scales as legal measuring instruments in the EU*: In the “SBI” setting, the non-verified display digit is not automatically
identified.
Please take the corresponding measures or adjust the settings on the peripheral device (see also “Interfaces”).