Operating instructions

Getting Started

Cubis MSE Operating Instructions 11

Assembly

Installing the Analytical Draft Shield Labeled DA, DI, and DU

Assembling the Balance

t Fit parts onto the balance as shown in the picture.

1. Shield plate

2. Pan support (not for MSx225.../MSx125... models)

3. Weighing pan

t Slide the upper draft shield panel into the guide rails from the rear.

t Slide the left and right draft shield panels into the guide rails from the rear.

Make sure the panels are within the upper and lower guide rails.

t Slide the panels in until they engage.

1. Right draft shield panel

2. Left draft shield panel

y This completes the balance assembly.