Service manual

Diagram: Determining the

Adjustment Resistance

Note:

If a 125 kg test weight is used

(corresponding to the maximum

capacity of the weighing platform)

rather than a 12.5 t test weight,

and the off-center load error is 0.8

kg, for example, then the same

adjustment resistance is set as

when a 12.5 t test weight is used.

eckl_2_e.tif

Corner load balancing for 350 ohm load cellsCorner load balancing for 350 ohm load cells

Corner load balancing for 350 ohm load cells

(For 700-ohm load cells the computed value must be doubled)