Service manual

7
Operating Concept
Keys below the Display
e On/off
Turns the Combics on and off.
Combics switched off displays
“off“.
n Toggle the display between
the weighing platforms (Combics
2 only)
With two weighing platforms
connected, this key toggles the
display between the two readouts.
( During weighing:
Zero the scale
In the operating menu:
Closes active submenu and
returns to next higher menu
level and menu level (unless the
first menu level is already shown)
During alphanumeric input
in the operating menu:
– Press briefly:
Activate character to the left
of the currently active character
(with the first character active:
Exit the input mode without
saving changes)
– Press and hold (> 2 sec ):
Exit the input mode without
saving changes
) During weighing:
– Press briefly:
Tare the scale
– Press and hold (> 2 sec ):
Calibration/adjustment
In the operating menu:
– Press briefly:
Display the next lower menu level
or
Select and store a menu item
– Press and hold (> 2 sec ):
Exit the operating menu
During alphanumeric input in the
operating menu:
– Press briefly:
Activate character/s to the right
of the currently active character ®
(after the last character: store
input)
– Press and hold (> 2 sec ):
Store current input and display
the menu item
k During weighing:
Toggle (depends on operating
menu settings) between:
– first and second weight unit or
– gross and net or
– normal and 10-fold increased
display resolution
In the operating menu:
Show the next item on the same
menu level (scroll through values
in series)
Combics 1
FnT0
combics1_bedienfeld.eps