Service manual

65
Entering the Model Designation of the Complete Combics Scale
(Indicator)
After replacing the digital PCB, the model designation of the complete scale or
Combics indicator must be written in memory.
– Activate the service mode (see page 15).
– Press k k k k to scroll through the menu until the display shows
ModEL.
– Press ) activate the input mode (the cursor flashes in the first position).
– Press the ) k keys as needed to enter the model designation (for
example, CISL1) of the weighing system.
– Press and hold the ) key (with the cursor to the right of the last character)
to store the model designation; the display returns automatically to ModEL.
cursor.eps
model1.eps
model.eps
model.eps
code_s.eps