Service manual

55
“Busy” is displayed briefly.
Afterwards, the Combics is re-started. The scale is in the normal weighing
mode.
Then adjust the weighing instrument and, if the Trade configuration is active,
return the menu access switch from the “accessible” to the “closed” position (see
page 12).
Menu Item 9-1: A/D Converter Configuration with Load Cell(s) Connected
(Example: Standard Configuration
– Activate the service mode (see page 15).
– Press ) repeatedly to select weighing platform »WP1«.
– Press the ) key to open the numeric menu. The first menu page is displayed.
Selecting Menu Line 1-13 (Tare/zero at power on)
and Changing the Settings If Necessary
– Open menu line 9-1 (Factory settings/Reset menu).
display_busy.eps.
display.eps.
display_wp1_serv.eps
display_serv_01.eps