Manualshelf

Service manual

ManualsBrandsSartorius ManualsKitchen AppliancesCW2P
11121314151617181920
14
Activating the xBPI Protocol
Activate the xBPI protocol to perform adjustment with the service software
Sartocas software or Psion server without activating the BPI mode
through the SBI/BPI key.
Note: This menu item is accessible in the standard menu.
– Via Setup select the Device parameters menu item (for the COM1 port).
– Open the Device parameters menu and scroll down to the Interface
submenu.
– Open the Interface submenu and activate the xBPI menu item.
Note: Under xBPI a submenu is opened for assigning addresses, but this function is only
available when using xBPI with RS-485.
display_xbpi.eps