Operating instructions

43
Neutral Measurement
Decimal places for display of results
o None
1 decimal place
2 decimal places
3 decimal places
Parameter for saving weight
o Standard stability
Increased stability
Scale for reference weight
o Do not change
WP 1
WP 2
Factory settings
Yes
oNo
Animal Weighing
Minimum load for automatic tare
1 digit
2 digits
5 digits
o 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Minimum load for starting
o 1 digit
2 digits
5 digits
10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Autotare first weight
o Off
On
Autostart app. at power on
On
o Off
Start
o Manual
Automatic
Animal Weighing
Minimum load for automatic tare
0.1% of the animal/object
o 0.2% of the animal/object
0.5% of the animal/object
1% of the animal/object
2% of the animal/object
5% of the animal/object
10% of the animal/object
20% of the animal/object
50% of the animal/object
100% of the animal/object
Automatic printout of results
o Off
On
Show normal weight after unloading
o Threshold for load change
Toggle key
Factory settings
Yes
oNo
Checkweighing
Minimum load for automatic tare
1 digit
2 digits
5 digits
o 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Autotare first weight
o Off
On
Autostart app when power is on
On
o Off
Checkweighing range
o 30% to 170%
10% to maximum load
<SET> control output
o ‘SET’ control signal
Ready to operate
(for process control systems)
Activation of port lines
Off
Always on
At stability
o Within checkweighing range
Stability + chckw. range = on
Type of checkweighing input
o Target, min, max, weight
Target, min in %, max in %