Operating instructions
32
Net-total Formulation R
With the Net-total Formulation applica-
tion, you can weigh in different compo-
nents up to a defined total. Each com-
ponent is saved in the net-total
memory.
Features
– Weigh in up to 999 components in
series
– Current component number displayed
in the text line (indicating the compo-
nent to be added)
– Toggle the display from “component
mode” to “additive mode” by pressing
the
A-mode soft key, and back by
pressing
C-mode.
– Component mode: Display the
weight of the component currently
on the platform (for 1 second after it
is saved; then the platform is tared)
– Additive mode: Display the weight
of all components on the platform
(after it is saved, the net weight of
the last component added is dis-
played briefly)
– Toggle to a second weighing platform
while weighing on the first
– Activate info-mode by pressing D
(> 2 sec)
– Automatic taring of container weight.
Configured in Setup under:
Application: Net
Total: Autotare
– Automatic printout of component
or total weight when weight is saved.
Configured in Setup under:
Application: Net
Total: Printout
If the Print one compo-
nent on request
parameter
is set, the entire standard printout
is generated every time. If
Print
components
is set, the full
printout is generated only once.
– Restore factory default settings.
Configured in Setup under:
Application: Net
Total: Factory set
Soft Key Functions
M+ Save the component value in
net-total memory
A-mode Toggle to Additive mode
C-mode Toggle to Component mode