Operating instructions

21
Soft key: l Save value for the lower limit
1.28 Enter value for the upper limit (in this example, 1.280 kg)
Soft key: l Save value for upper limit
Weigh samples
Print the results
p Note: If automatic printout of results is enabled, you do not need to press the p key;
the results are printed automatically.
Setp + 1.250 kg Target
Min + 1.240 kg Minimum
Max + 1.280 kg Maximum
G# + 1.256 kg Gross weight
T + 0.000 kg Tare weight
N + 1.256 kg Net weight
Lim + 0.48 % Percentage of deviation from target*
W.Diff+ 0.006 kg Absolute deviation from target
--------------------
* When displayed in relation to target value:
If the weight is lighter than the target, the display shows: Stat LL
If the weight is heavier than the target, the display shows: Stat HH