Operating instructions

4
Intended Use
This weighing platform is part of a modular system that consists of the
weighing module (weighing platform) and a display and control unit or isi
industrial terminal. The display and control unit comes with a separate
instruction manual. Before installing or operating your weighing equipment,
please read all instructions thoroughly.
Warranty
Do not miss out on the benefits of our full warranty. Please contact your
Sartorius office or dealer for further information. If available, complete the
warranty registration card, indicating the date of installation, and return it to
your Sartorius office or dealer.
Storage and Shipping Conditions
– Allowable storage temperature: – 10 °C to + 40°C
+ 14 °F to + 104 °F
– Allowable humidity during storage: 90% relative humidity
After unpacking the equipment, please check it immediately for any visible
damage. If you detect any damage, proceed as directed in the section
entitled “Safety Inspection.”
It is a good idea to save the box and all parts of the packaging until you
have successfully installed the equipment. Only the original packaging
provides the best protection for shipment. To prevent damage to the
equipment, unplug all cables before packing the equipment for shipping.
Safety Instructions
The equipment may be opened only by authorized service technicians who
have been trained by Sartorius and who perform repair or maintenance work
in accordance with Sartorius’ standard operating procedures.
– Always disconnect the equipment from power before performing
any repair work.
– Do not use the weighing platform in a hazardous area/location.
– Do not operate the equipment in environments exposed to potentially
explosive mixtures of ambient gases and dust.
– Any damage to the seals affixed to the equipment housing will result
in forfeiture of all claims under the manufacturer’s warranty.
Note:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense. Changes or
modifications not expressly approved by Sartorius could void the user’s
authority to operate the equipment.