Operating instructions

15
Pin Assignment Chart for the RS-485 Interface
Cable length: 3 m (approx. 10 ft.)
Male connector:
Type C091D, 12-pin round connector with threaded locking ring, Amphenol
(IP65)
A RxD-TxD-N
B Not connected
C Not connected
D Not connected
E Signal GND
F Menu access switch for calibration/adjustment
(routed externally)
G VCC (24V power supply)
H Not connected
J GND (24V power supply)
K GND (24V power supply)
L RxD-TxD-P
M VCC (24V power supply)
Pin Assignments/Interface Connector
(Recommended):
Type C091D, 12-pin, Amphenol (IP65)
Type of cable: AWG 24 specification
Be sure to follow the instructions above for connecting the weighing platform
to the power supply!
Specifications Chards