User manual

NOTE: The battery cover pack fits in to the

compartment one way only. If the pack is inserted

incorrectly the battery cover will not close properly.

NOTE: Only use battery packs supplied by the

manufacturer. The use of any other type of battery will

immediately void the warranty!

7. Troubleshooting

The eLINE Dispenser Lite have a onboard monitoring

program to control the performance of each pipetting

action. If any error message appears to the display it

means that the Dispenser has been unable to perform

the attempted action properly. In case of an error the

display will show ER and PRSS ENT. message. To clear

the message please follow these steps:

1. Clear the error message by pressing . The

display will show E and .

2. Press the and the blunger moves to the home-

position. The display will show E and TIP.

3. Remove the tip by pressing the tip ejection button

NOTE: Repeated occurrence of error messages

indicates an internal error causing failure of the

Dispenser to complete the execution of the pipetting.

The Dispenser therefore needs to be returned to the

nearest Sartorius Service Centre or your local Sartorius

service representative for repair.