User manual

NOTE: When aspirating the liquid using the 25 or 50 ml

tip, let the tip stay in the liquid a few seconds after the

plunger has stopped moving. This way you will ensure

that all liquid has been aspirated into the tip.

NOTE: It is possible to work with aqueous liquids

and liquids with higher viscosity. However, it is

recommended always to choose the tip with the

smallest applicable volume in conjunction with high

viscosity liquids. Please note, the specifications are

given in accordance with ISO8655-5.

6. Maintenance

6.1. Cleaning the dispenser

To ensure trouble-free operation it is recommended

to apply regular maintenance and cleaning to eLINE

Dispenser Lite.

To clean and decontaminate the outer surface use

ethanol (70%), isopropanol (60%) or mild detergent and

a soft lint-free cloth. Gently clean the surface of the

pipette with the moistened cloth and wipe dry.

NOTE: Remove the battery pack from the dispenser

prior the cleaning! It is recommended always to use

gloves when cleaning the dispenser. Do not let the

liquid enter the pipette handle!

6.2. Battery replacement

The design of the Dispenser Lite enables fast and easy

battery replacement. The battery replacement pack

includes 4 NiMH batteries fixed to the battery cover. If

the batteries do not hold a sufficient charge for proper

operation follow these steps for replacement of the

battery pack.

1. Hold the dispenser in a horizontal position with the

display facing up.

2. Press the two charging contacts simultaneously to

release the battery pack.

3. Place the new battery pack into the compartment

and close the battery cover by pressing it lightly.