User manual

13
Tip confirmation after tip ejection
Tip ejection If you want to
change the tip size
if you want to
continue with the
same tip size
2 x
Change
- the aliquot volume
- the number of aliquots
- the tip size
2 x
5.2. Programming of the multiple
dispensing mode using the
TipGuide
1. Adjust the Dispenser to the initial position
by pressing .
NOTE: The tip will be eject ed if it is at t ach ed!
2. Select the desired aliquot volume by pressing
NOTE: When holding down the the volume
display start to scroll faster
3. Press to confirm the selection
4. Select the number of aliquots by pressing
5. Press to confirm the selection
6. Now the TipGuide shows the best tip option.
If there are also other tip options available,
the Tipsize-text is blinking. View the other
options by pressing
7. Confirm your selection by pressing and
continue from step 12. Or press to change
the aspiration/dispensing speeds.
8. Select the speed in with (1=Min and 5=Max)
9. Press or to confirm selection and to
display the speed out
10. Select the speed out with (1=Min and 5=Max)
11. Press to confirm selection
12. Now the text “TIP” is blinking on the display.
Attach the tip
TIP SIZE
tIP ml
10 ml
count
2 x
4.0 0 ml
TIP SIZE
10 ml