Operating instructions

Connecting a Bar Code Scanner (Accessory: YBR02CISL)

! Disconnect the equipment from AC power (unplug the AC adapter)

$ Installation

For model CW1NP | CW2P:

– Connect a 25-pin D-SUB male connector (connecting cable YCC02-BR01) to a second

“UNICOM” interface port

– For bar code scanner and external rechargeable battery: please use T connector YTC01.

For model CW1NS | CW2S: see the section entitled “Pin Assignment Chart“

(via connecting cable YCC02-RB02 or as option M8)

Installing the Verification Adapter for Use in Legal Metrology

(on verifiable models only)

§ Remove the nut located on the back of the indicator

§ Use the slotted screw to install the adapter plate

§ Affix the verification seal over the adapter