Operating instructions

95
Data Output Format (Line Format)
You can output the values displayed in the line for measured
values and the weight unit with or without a data ID code. Select
menu item 7.2 to define whether the data ID code is included.
Examples:
+ 235 pcs Without data ID code
Qnt + 235 pcs With data ID code
Settings:
7.2.1: without ID code
7.2.2: with ID code (factory setting).
Without a data ID code, the output line has 16 characters;
with a data ID code, 22 characters.
Output Format with 16 Characters
Display segments that are not activated are output as spaces.
Characters without a decimal point are output without a
decimal point.
The following types of characters can be output, depending
on their position in the output string:
Normal Operation
Position 12345678910111213141516
+* DDDDDDDD * UUUCRLF
or - * DDDDDDDD * UUUCRLF
or **************CRLF
+-: Plus or minus sign
*: Space
D: Digit (or letter) as in the readout (up to 7 numbers plus
decimal point)
U: Character for unit of measurement
1
(1 to 3 letters followed by 0 to 2 spaces)
CR: Carriage return
LF: Line feed
1)
depends on scale type; e.g., not all units and characters
are available on scales verified for use in legal metrology.
Special Codes
Position 12345678910111213141516
******––******CRLF
or ******H*******CRLF
or ******HH******CRLF
or ******L*******CRLF
or ******LL******CRLF
or ******C*******CRLF
*: Space
– –: Final readout mode
H: Overload
HH: Overload in checkweighing
L: Underload
LL: Underload in checkweighing
C: Calibration/adjustment
Error Codes
Position 12345678910111213141516
***Err**##****CRLF
or ***Err*###****CRLF
*: Space
#: Error code number (2 or 3 digits)
Example: Output weight of+1255.7 g
Position 12345678910111213141516
+* * * 1255. 7 * g * * CRLF
Position 1: Plus + or minus sign - or space
Position 2: Space
Position 3-10: Weight with decimal point; leading zeros
are output as spaces
Position 11: Space
Position 12-14: Character for unit of measurement or space
Position 15: Carriage return
Position 16: Line feed
Data Output Format with 22 Characters
When data is output with an ID code, the 6-character code
precedes the 16-character string described above. The code
identifies the subsequent value.
Normal Operation
Position 12345678910111213141516171819202122
IIIIII+*DDDDDDDD* UUUCRLF
or IIIIII-*DDDDDDDD* UUUCRLF
or ********** * * ********CRLF
I: ID code character
1
. If the code has fewer than 6 characters,
spaces are inserted for the remaining characters.
+-: Plus or minus sign
*: Space
D: Digit (or letter) as in the readout (up to 7 numbers plus
decimal point)
U: Character for unit of measurement
1
(1 to 3 letters followed by 0 to 2 spaces)
CR: Carriage return
LF: Line feed
Special Codes
Position 12345678910111213141516171819202122
Stat****** * * ––******CRLF
or Stat****** * * H*******CRLF
or Stat****** * * HH******CRLF
or Stat****** * * L*******CRLF
or Stat****** * * LL******CRLF
or Stat****** * * C*******CRLF
*: Space – –: Final readout mode
H: Overload HH: Overload in checkweighing
L: Underload LL: Underload in checkweighing
C: Calibration/adjustment