Operating instructions

Counting Application
The block for initialization data
contains the reference sample quantity
and reference piece weight. The results
block shows gross, net and tare weights,
as well as the calculated piece count.
HEADER1
HEADER2
14.01.2002 09:43
--------------------
nRef 10 pcs
wRef + 0.035 kg
G# + 1.402 kg
T + 0.212 kg
N + 1.190 kg
Qnt 34 pcs
--------------------
Neutral Measurement Application:
The block for initialization data
contains the reference number and
reference weight. The results block
shows gross, net and tare weights,
as well as the calculated piece count.
HEADER1
HEADER2
14.01.2002 09:43
--------------------
Ref 2 o
wRef + 1.200 kg
G# + 14.700 kg
T + 0.300 kg
N + 14.400 kg
Qnt 12 o
--------------------
Weighing in Percent Application:
The block for initialization data
contains the reference percentage and
reference weight. The results block
shows gross, net and tare weights,
as well as the percentage, shown as
either the loss or the residual amount.
Percentage as residue
HEADER1
HEADER2
14.01.2002 09:43
--------------------
pRef 100 %
Wxx% + 2.100 kg
G# + 1.859 kg
T + 0.200 kg
N + 1.659 kg
Prc 79 %
--------------------
Percentage as loss
HEADER1
HEADER2
14.01.2002 09:43
--------------------
pRef 100 %
Wxx% + 2.100 kg
G# + 0.641 kg
T + 0.200 kg
N + 0.441 kg
D21%
--------------------
Checkweighing Application:
The block for initialization data
contains the nominal, minimum and
maximum weights. The results block
always contains the gross, net and
tare weights. The other results can
be displayed in two ways:
– Result as weight:
The deviation from the nominal weight
is given both as a percentage and as an
absolute (weight) value, whether the
result lies within the “OK" range or not.
– Result in relation to configured
thresholds:
The deviation from the nominal weight
is given both as a percentage and as
an absolute (weight) value if the result
lies within the “OK" range.
If the result is outside the defined
tolerance limits, the last line indicates
the status is indicated as follows:
“HH" = too heavy; “LL" = too light.
Result within “OK" range; “weight" or
“threshold" printout
HEADER1
HEADER2
14.01.2002 09:43
--------------------
Setp + 1.300 kg
Min + 1.235 kg
Max + 1.365 kg
G# + 1.312 kg
T + 0.000 kg
N + 1.312 kg
Lim + 0.92 %
Diff.W+ 0.012 kg
--------------------
Result outside “OK" range; “weight"
printout
HEADER1
HEADER2
14.01.2002 09:43
--------------------
Setp + 1.300 kg
Min + 1.235 kg
Max + 1.365 kg
G# + 1.200 kg
T + 0.000 kg
N + 1.200 kg
Lim - 7.69 %
Diff.W- 0.100 kg
--------------------
Result outside “OK" range (too light);
“threshold" printout
HEADER1
HEADER2
14.01.2002 09:43
--------------------
Setp + 1.300 kg
Min + 1.235 kg
Max + 1.365 kg
G# + 1.200 kg
T + 0.000 kg
N + 1.200 kg
Stat LL
--------------------
Result outside “OK" range (too heavy);
“threshold" printout
HEADER1
HEADER2
14.01.2002 09:43
--------------------
Setp + 1.300 kg
Min + 1.235 kg
Max + 1.365 kg
G# + 1.400 kg
T + 0.000 kg
N + 1.400 kg
Stat HH
--------------------
92