Operating instructions

87
Preparation
§ For pin assignments, see the section
entitled “Pin Assignment Chart.”
Options for Connecting Peripherals
You can connect the following printers
to the standard COM1 port or the
optional UniCOM universal port:
– YDP02 (user-definable settings of
the interface parameters)
– YDP03 (user-definable settings of
the interface parameters)
– YDP01IS (strip or label printer)
– YDP02IS (strip or label printer)
– YDP04IS (strip or label printer)
– Universal printer (user-definable
settings of the transmission parameters)
– Alibi memory, YAM01IS
! If necessary, use an external power
source to power peripheral devices.
In addition, the following devices can
be connected to the standard COM1
port:
– Foot switch / hand switch
– PC (RS-232 interface)
– 2nd weighing platform (only for
Combics 2, RS-232 interface port)
– External checkweighing display
(“traffic-light” display) via digital I/O
(Sartorius standard)
The connector of the UniCOM universal
port allows the following standard
devices to be connected:
– A rechargeable battery pack
– A bar code scanner (only for Combics 2)
The following devices can be connected
to the optional UniCOM universal port:
– Rechargeable battery pack
– PC (RS-232 interface)
– 2nd weighing platform (only for
Combics 2, can be switched from the
RS-232 to RS-485 mode)
– 2nd printer (external power source
required)
– Remote display
– Bar code scanner / keyboard interface
– Digital I/O
– Current interface (0/4-20 mA)
Analog UniCOM interface (optional)
Standard: 4 to 20 mA, 0 to 20 mA, 0 to 5V
Power supply: Internal or external
Factory settings: 4 to 20 mA, internal power supply
Interface connector: CISL1 and CISL2 indicators (IP44 protection):
25-contract D-Sub female connector
CIS1 and CIS2 indicators (IP65/67 protection):
The free ends of the cable are connected to terminal screws
inside the housing; the cable is routed into the housing
via a cable gland.
COM1 Off *
WP2
1)
RS-232 SBI standard version
SBI verified version
XBPI-232 *
ADC-232
Data protocol SBI *
XBPI-232
MP8 binary
SMA
Printer YDP01IS Line *
Label
Label, man. form feed
YDP02
YDP03
YDP02IS Line *
Label
Universal
YDP04IS Line *
Label
Label, man. form feed
YAM01IS
(Alibi memory)
External YAM01IS
Alibi memory
UniCom Off *
WP2
1)
RS-232 SBI standard version
SBI verified version
XBPI-232 *
ADC-232
RS-485 IS-485 *
ADC-485
Data protocol SBI *
XBPI-232
XBPI-485
SMA
Printer YDP01IS Line *
Label
Label, man. form feed
YDP02
YDP03
YDP02IS Line *
Label
Universal
YDP04IS Line *
Label
Label, man. form feed
YAM01IS
(Alibi memory)
Analog output
External YAM01IS
Alibi memory
* = Factory setting
1)
only for Combics 2