Operating instructions

76
Example
Weigh in 3 components, then view total weight of components (Additive mode)
Configure Settings
e Switch on the Combics
While all segments are lit, press the ) key
)
Display for selecting the application is shown
Open Application selection appl Symbol for Net-Total Formulation: R
Select Net-Total Formulation
Application settings: Please see the “Preparation" section on the previous page
3.5.1; 3.7.1; 3.17.3
) (press and hold) Exit Application selection
Operation
Place container on platform
Display shows container weight and prompt to add 1st component
) Tare the weighing platform
8
881
8888888
appl000
8
11
500
8
11
00
Combics 2