Operating instructions

68
Example
Weighing in percent after weighing in the defined reference amount
Configure Settings
e Switch on the Combics
While all segments are lit, press the ) key
)
Display for selecting the application is shown
Open Application selection appl Symbol for Weighing in Percent: L
Select Weighing in Percent
) (press and hold) Exit Application selection
Operation
Place empty container on the platform
) Tare the weighing platform
Press
r (repeatedly, if necessary) to set the desired reference percentage (in this example, 50)
8
881
8888888
appl000
8
0001
00
8
0001
00
Combics 2