Operating instructions

61
Preparation
§ Press the e key to switch on the
Combics
§ While all segments are lit, press the
) key
§ Show application settings: Press the
k key
§ Open the numeric menu: Press the
) key twice
3 Application parameters
3.5 Minimum load for automatic taring
and automatic printing
3.5.1 1 digit
3.5.2 2 digits
3.5.3 5 digits
3.5.4 10 digits
3.5.5 20 digits
3.5.6 50 digits
3.5.7 100 digits
3.5.8 200 digits
3.5.9 500 digits
3.5.10 1000 digits
3.6 Minimum load for setting the
lower limit of Class 1
3.6.1 1 digit
3.6.2 2 digits
3.6.3 5 digits
3.6.4 10 digits
3.6.5 20 digits
3.6.6 50 digits
3.6.7 100 digits
3.6.8 200 digits
3.6.9 500 digits
3.6.10 1000 digits
3.7 Automatic taring (first weight tared)
3.7.1 Off
3.7.2 On
3.8 Application started automatically with
most recent initialization data when
Combics switched on
3.8.1 On (automatic start)
3.8.2 Off (manual start)
4 Application parameters 2
4.3 Activate control line for “Set" as
4.3.1 “Set" output
4.3.2 Operative
4.7 Control outputs
4.7.1 Off
4.7.2 Always activated
4.7.3 Activated at stability
4.8 Number of classes
4.8.1 3 classes
4.8.2 5 classes
4.9 Enter parameters for Classification as
4.9.1 Weight values
4.9.2 Percentages
4.10 Automatic printout of results
4.10.1 Off
4.10.2 On
§ Save settings and exit Setup: Press and
hold the ) key
Operating the Combics 2