Operating instructions

57
Operating the Combics 2
The middle bar graph segments flash, percentage for limits (in this example: 5%)
O The weight of the sample is stored as the target value.
The percentage is stored for the tolerance limits (minimum, maximum).
Press and hold the
w key to view the stored results if desired (Info mode)
The target value is displayed
Press
w to display the percentage for tolerance limits if desired.
The percentage for the tolerance limits is displayed.
Press
w to display the lower tolerance limit (minimum) if desired.
The minimum is displayed.
Press
w to display the upper tolerance limit (maximum) if desired or
Press and hold down
w to exit the menu target value, minimum and maximum (exit Info mode)
Remove the load from the weighing platform
The weighed value appears in the main indicator, the bar graph segments are not lit up.
8
51
1000
8
fni
1000
8
fnI
5
8
fni
950
Combics 2
00