Operating instructions

Example

Initialize checkweighing by storing a weighed value as the target value, tolerance limit display mode in percent

Configuring the Scale

e Switch Combics on

While all segments are lit, press the ) key

)

The display for selecting the application appears

Select application appl Symbol for Checkweighing: O

Select Checkweighing

If desired, change the configurations in see the paragraph “Setup" on the previous page

the Setup menu:

Press and hold

) to exit the application

Weighing Mode

c Delete previously selected initialization, if necessary

Place a sample on the weighing platform for target value (here: 100.0g)

The weight of the sample is indicated (percentage for limit value, here: 10%)

O Start initialization (enter target value and limits)

The middle bar graph segments flash

Press

r (repeatedly, if necessary) to set the desired percentage for the tolerance limits (minimum, maximum)

881

8888888

appl000

1000

Combics 2